Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL.
Input for thermocouples and mV sources, intrinsically safe [Ex ia] IIC
4...20 mA or 20...4 mA output signal range
High level of accuracy over the entire measuring range
Configuration via software (Analogue-CONF or DTM)
Safe electrical isolation between input, output, and supply
High transmission accuracy
Status and error indicator
Power supply possible via DIN rail connector
Housing width of 12.5 mm
Screw connection available
| 屬性 | 數值 |
|---|---|
| 模塊類型 | 溫度轉換器 |
| 輸入信號類型 | 熱電偶， 電壓 |
| 輸出信號類型 | 電流 |
| 電源電壓 | 24V 直流 |
| 輸入范圍 | -1000 → 1000 mV, -250 → +2500°C |
| 輸出范圍 | 0 → 20 mA, 4 → 20mA |
| 危險區認證 | ATEX |
| 安裝類型 | DIN 卡軌安裝 |
| 工作溫度范圍 | -40 → +70°C |
