J 類熔斷器
真正雙元件熔絲，在 500% 過載時具有至少 10 秒的延時
雙元件結構可減少功率損耗并使運行溫度更低
高斷開容量： 300kA
額定電壓 600V 交流
由于對短路的快速響應，因此具有高電流限制
獨特的尺寸可確保不同的熔斷器不能被替換
庫存號 513-0623 和 513-0718 具有插片接線端子
UL 248-8 J 類
UL 認可；CSA 認證
Protect high-capacity systems from both overloads and short circuits with this cartridge fuse from Eaton Bussmann. A dual element inside the fuse provides a high level of protection from these common electrical faults. This construction has the added advantage of minimising power loss and allowing cooler operation for greater efficiency. It has a T fuse speed to give a 10-second time delay before breaking. This slow-acting function means it's unlikely to blow when temporary overloads and surges occur, cutting down nuisance tripping and reducing the need for frequent fuse replacement.
? High breaking capacity (HBC) of up to 300,000A means it deals with high and low current faults for all-round protection
? Unique cartridge size of 60 (length) and 25mm (width) prevents incorrect fuse replacement for increased safety
? Voltage rating of 600V AC and current rating of 50A to work with industrial power distribution applications
Slow-acting fuses are helpful in industrial circuits where the starting of motors and devices can cause brief power fluctuations.
Eaton formerly known as Eaton Bussmann
美國標準熔絲管，包括快熔式小型和雙元件延時類型
| 屬性 | 數值 |
|---|---|
| 額定電流 | 50 A |
| 熔斷器尺寸 | 25 x 60mm |
| 熔斷器速度 | T |
| 額定電壓 | 300 V ac, 600 V 交流 |
| 總尺寸 | 25 x 60mm |
| 系列 | Bussmann |
