產品詳細信息
Phoneix Contact 的 DIN 導軌安裝 FL 隔離器網絡隔離器用于工業以太網中的電氣隔離。該設備可保護以太網端接設備和接口，防止電位差異和高達 4 kV 的補償電流。FL 隔離器是一種無源設備，直接安裝在要保護的網絡設備的上游，無需電源。
?無需電源
?介電強度高達 4 kV
?防止侵蝕性環境影響
?傳輸速度高達 1000 Mbps
?經 EN 50155 和 EN 50121 認證，可用于鐵路應用 (滾動庫存)
?數據電纜和電纜屏蔽的電氣隔離
?擴展溫度范圍 -25°C 至 +85°C
? DIN 導軌安裝
FL 隔離器配有兩個 RJ45 格式的前側以太網接口，用于連接雙絞線電纜。要使設備正常工作，您為傳入和傳出線路分配的端口無關緊要。
Use this network isolator from Phoenix Contact to separate electrical circuits in your industrial ethernet network. It protects ethernet devices from potential voltage differences of up to 4 kV.
The passive isolator doesn't need power to operate and can be installed directly upstream from the network device it's protecting. It has two interchangeable ports that accept either incoming or outgoing lines. Transmission speeds are fast and consistent at 100 megabits per second. The component's cables are isolated to protect against electrical hazards, and it can function in temperatures ranging from -25°C to +85°C.
Because it has a polybrominated biphenyl (PBB) coating, this isolator is a durable choice that can stand up to challenging environmental conditions. It's a good choice for circuit boards that are exposed to factory air contaminants. As it meets European standard EN 50155, it's approved for use in railway applications where shock and vibration are present.
? Input range of 0 to 100 Mbit/s
? Output range of 0 to 100 Mbit/s
? Frequency input signal type
? Side mounting type
? Frequency output type
| 屬性 | 數值 |
|---|---|
| 輸出類型 | Frequency |
| 安裝類型 | Side |
